CO-250 detector

Short descriptionTechnical dataConnection terminals The CO-250 detector is designed to detect increased concentrations of carbon monoxide (CO). It is mainly used in garages. Its connection is performed with two wires and its signal output is 4-20mA through which it is also powered.   Detection principle  electro-chemical Operation  continuous Gas entry  by diffusion through sintered cartridge…

Details

GP-100 detector

Short descriptionTechnical dataConnection terminals The GP-100 detector is designed to detect increased levels of combustible gases. The detector needs to be calibrated separately for each gas you want to detect so that the detector reports the % LEL (lower explosive limits) for the gas. It is connected via three-wires and it has a signal output…

Details

Addressable interface AV-602

DescriptionTechnical dataConnection schemeAddressable loops 1. FUNCTION: The AV-602 interface is used for connecting from one to four gas detectors (4-20mA). Every detector gets its own address. The interface is connected to the central control panel through the S-90 or the XP-95 protocol. 2. PROPERTIES The interface responds on one up to four addresses on the…

Details